Blade V3 Fork

par Fitbikeco
Désolé 0 disponible . Appeler pour posibilité de réserver sur prochaine réception


Our goal was to design and produce an extremely strong fork with plenty of tire clearance. After 2 years of R&D and a lot of investment in tooling, the Blade V.3 is available with a traditional 33mm offset. Here are a few features that make these forks so strong.

Using left and right specific investment cast drop-outs instead of traditional Cr-Mo plate, we’ve eliminated the weld gap on the inside of the drops and were able to thicken up the drops toward the top making a much stronger drop-out/leg connection.

Seamless, swaged legs provide more strength than welded or fused caps-especially if pegs are installed. The ends of these legs are formed, not capped and welded so there is nothing to fracture.

A longer 166mm CNC’d steerer tube with increased wall thicknesses wherever possible and a 24mm x 1.5 compression cap with integrated race.

Tapered and butted legs provide tons of strength, crown weld surface, and peg clearance.

Post weld 4Q Baked heat-treatment


: Legs : Seamless Swaged (No Welded Cap)
: Dropouts : Investment Cast
: Steerer Tube : 1 Piece CNC-Machined 4130 CrMo
: Steerer Tube Length : 166mm
: Compression : M24 X 1.5 Thread – 6mm Allen Slot
: Axle to Crown : 320mm
: Offset : 33mm
: Weight : 2.25 lb (1.02 kg)
: Heat Treat : 4Q Baked Post-Weld

Spinner et gagner Spinner icon